The Answer
They can be installed two 16 feet boards back to back, or 32 feet. Any greater lengths could leave notably exposed gaps between boards, after 32ft we recommend using a butt joint trim.
Keep Reading
More on Siding & Cladding
- Can I miter the siding trim to fit with my installation? Yes, this would be fine. Read answer
- Can NewTechWood decking and siding be used in curved applications? Our Ultrashield Naturale material does have a bend to it, due to the material properties, but is not… Read answer
- Can I use metal flashing with my siding trim? Yes, you may.As long as the siding fits in the trim and allows for expansion and contraction. Read answer
- Is a vapor shield necessary when installing NewTechWood siding on a home made of cinder blocks? Such an installation does not need a vapor barrier. The wall is sufficiently waterproof, if it is made… Read answer
- Can the outside corners be mitered instead of using siding fascia? We do not recommend mitering corners as our boards will expand and contract, we recommend using our outside… Read answer
- Can the NewTechWood siding boards be installed with the smooth side exposed? Is there a smooth surface version of the siding boards? The siding cannot be installed this way, as the shape of the board would make this impossible to… Read answer
