The Answer
No, but we do not recommend gaps of greater than 12 inches for ceiling or wall application. We also do not recommend gaps between starter strips at the ends of the siding installation.
Keep Reading
More on Siding & Cladding
- If my board is locked down on one end (for example, through using the second screw hold on the siding clip), how much space do I need to leave on the other end to allow for expansion? This depends on the length of the board. An 8-foot board would need 1/8th of an inch, a… Read answer
- Is there a butt joint for the European siding? Yes, you can use the I- Trim(UH70) for both profiles UH58 & UH46. Read answer
- Is a vapor shield necessary when installing NewTechWood siding on a home made of cinder blocks? Such an installation does not need a vapor barrier. The wall is sufficiently waterproof, if it is made… Read answer
- Do I need to leave any gaps between butt joints if I install the siding in cold weather? What about in hot weather? Please keep in mind that because of the expansion and contraction nature of our material, there would need… Read answer
- Can NewTechWood US05 decking fascia be used as siding? No, our fascia boards are not designed for siding installation, this can application can void the warranty. Read answer
- Is NewTechWood material California Wildland Urban Interface (WUI) compliant? NewTechWood deck boards are not WUI compliant. However, NewTechWood siding can be made WUI compliant by installing it… Read answer
