The Answer
The total thickness from the outside of the board and the substrate, when the US09 profile, is used is 1.25 inches, and with the European siding is 2.25 inches.
Keep Reading
More on Siding & Cladding
- If my board is locked down on one end (for example, through using the second screw hold on the siding clip), how much space do I need to leave on the other end to allow for expansion? This depends on the length of the board. An 8-foot board would need 1/8th of an inch, a… Read answer
- How much spacing do you need between the wall and the boards? With a ¾ inch spacing created by the joists and an additional ¼ created by the AW08 siding… Read answer
- Can NewTechWood US05 decking fascia be used as siding? No, our fascia boards are not designed for siding installation, this can application can void the warranty. Read answer
- Do I need to leave any gaps between the siding and the siding trim? Please keep in mind that because of the expansion and contraction nature of our material, there would need… Read answer
- Is there a height restriction above which NewTechWood siding cannot be installed? While we have not specifically tested for such a height restriction, we would not be aware of any… Read answer
- Is NewTechWood material California Wildland Urban Interface (WUI) compliant? NewTechWood deck boards are not WUI compliant. However, NewTechWood siding can be made WUI compliant by installing it… Read answer
