The Answer
You can use the F-trim to cover the aluminum angle bracket at the bottom of the wall
Keep Reading
More on Siding & Cladding
- If my board is locked down on one end (for example, through using the second screw hold on the siding clip), how much space do I need to leave on the other end to allow for expansion? This depends on the length of the board. An 8-foot board would need 1/8th of an inch, a… Read answer
- How long can the siding boards be installed without a butt joint trim? They can be installed two 16 feet boards back to back, or 32 feet. Any greater lengths could… Read answer
- What is the total thickness of the siding installation? The total thickness from the outside of the board and the substrate, when the US09 profile, is used… Read answer
- Do I need to leave any gaps between the siding and the siding trim? Please keep in mind that because of the expansion and contraction nature of our material, there would need… Read answer
- Is it possible to attach heavy objects to NewTechWood siding, such as signs or cabinets? Yes, this is possible. However please be sure to screw through the siding to the joists themselves, to… Read answer
- In the European style siding installation guide, screws are required. How do I hide these screws? You can use our color-match fascia screws for this. This will allow them to not be seen clearly… Read answer
