Composite Deck Tiles

Deck Tiles

Composite Deck Tiles

4-Sided
UltraShield capping
95%
Recycled materials
Zero
Staining or sealing

Every NewTechWood® board is protected by UltraShield® technology — see how it outperforms traditional wood.

Composite Deck Tiles installed

Composite

Composite Deck Tiles

View Details

Interlocking, snap-together UltraShield® capped composite tiles that turn any flat surface into finished decking in an afternoon.

Grass Tiles installed

Grass

Artificial Grass Tiles

View Details

The look of a manicured lawn on surfaces that can't support real turf — rooftops, balconies, patios, and pool surrounds.

Ceramic Deck Tiles installed

Ceramic

Ceramic Deck Tiles

View Details

The visual weight of a flagstone or quarry-tile patio on a snap-together base that installs without mortar or grout.

Specifications

Composite Deck Tiles at a Glance

Every profile in this range, side by side. Full colors, downloads, and installation details live on each series page.

Model Dimensions Weight
Composite Deck Tiles
US-QD-ZX - Quick Deck Tile Depth 7/8" (22 mm) Width 11-13/16" (307 mm) Length 11-13/16" (307 mm) 2.4 lb per tile (10 per carton)
US-QD-ZX-24 - Quick Deck Plank Tile Depth 7/8" (22 mm) Width 12-1/8" (307 mm) Length 24" (611 mm) 4.8 lb per tile (10 per carton)
US-QD-ZX-36 - Quick Deck Plank Tile Depth 7/8" (22 mm) Width 12-1/8" (307 mm) Length 36" (915 mm) 7.2 lb per tile (5 per carton)
Grass Tiles
Grass Deck Tile Depth 2-3/16" (55 mm) Width 12-1/8" (307 mm) Length 12-1/8" (307 mm) 1.01 lb per tile (10 per box)
Grass Deck Tile XL Depth 2-3/16" (55 mm) Width 24" (612 mm) Length 24" (612 mm) 5.02 lb per tile (4 per box)

FAQ

Composite Deck Tiles FAQs

  • What should be used for your NewTechWood deck tiles in terms of gravel and sand depth? Is sand needed on top of the gravel?

    We would recommend using two inches of gravel covered by one inch of sand. You would therefore want to prepare the area by crushing the gravel and compacting the layers as tight as you can.

  • Can NewTechWood deck tiles be placed over a plywood base?

    Yes, that would be totally fine. Please ensure this plywood base is flat and structurally sound.

  • Can this be used on a roof deck that is finished with a rubber membrane? Will the deck tiles puncture this membrane?

    Yes, although the chance of puncturing is low, you may want to place an additional TPO or EPDM membrane / polysheet above your existing rubber membrane to avoid any damage during the installation process. We recommend a minimum thickness of 40 mils. We do not have a recommended product or manufacturer. The deck tiles themselves do not have any sharp points on the bottom.

  • Would these deck tiles blow away in the wind?

    We do not believe this is likely as each deck tile is 2.5 lbs., so a 100 square foot deck would be 250 lbs. Additionally, the gaps between deck tiles make it difficult for the wind to catch enough of the deck surface to move it.

  • Can grass tiles and deck tiles be connected to each other?

    Yes. Every NewTechWood US-QD line product — deck tiles, grass tiles and planter boxes — can be connected to the others, because they all share the same dovetail connectors.

  • Do the spaces for the deck tiles allow for debris to fall in between the slats?

    Yes, that is correct. The deck tiles do have tiny spaces between the slats, where small particles can fall into. However, they are easy to clean with soap and water, including light hosing.

See all 38 deck tiles questions