The Answer
The slats (boards) of the deck tiles are 2.75 wide. The gaps are 0.2 inches wide. With 4 slats and 5 gaps, this comes to a total of 12.
Keep Reading
More on Deck Tiles
- Can NewTechWood deck tiles be adhered to a surface in any way? While some customers have had limited success with Liquid Nails, the weight of each deck tile (2.5 lbs… Read answer
- How much weight do the deck tiles hold? You can estimate about 100 lbs per square foot to be supported by the deck tiles. However, this… Read answer
- Can this be used on a roof deck that is finished with a rubber membrane? Will the deck tiles puncture this membrane? Yes, although the chance of puncturing is low, you may want to place an additional TPO or EPDM… Read answer
- Would NewTechWood deck tiles allow for trim or fascia to be connected if the deck tile is cut? Cutting the connectors does disallow for the deck tiles to be connected to the edge pieces. We have… Read answer
- Do these deck tiles allow for water to evaporate? Yes, the gaps between the deck tiles allow for water to evaporate. Read answer
- In what colors are the 1×2 deck tiles and the 1×3 deck tiles available? The 1x2 deck tiles are available in Brazilian Ipe, Hawaiian Charcoal, Peruvian Teak, Roman Antique, Spanish Walnut, and… Read answer
