The Answer
You can use a PVC trim board across the bottom to keep all the boards straight.
Keep Reading
More on Accessories & Hardware
- From where can we purchase accessories (clips, end caps, fascia, trim, screws, and repair kits)? Accessories can be ordered through any retailer that sells our deck board, deck tile, or siding, including Home… Read answer
- Would NewTechWood deck tiles allow for trim or fascia to be connected if the deck tile is cut? Cutting the connectors does disallow for the deck tiles to be connected to the edge pieces. We have… Read answer
- What is the best way to ensure one does not over tighten the screw when using the T-clip? To avoid this issue, make sure to set the appropriate torque setting on the drill or screw gun. Read answer
- Would it be possible to create outside and inside curves using the deck tile trim and fascia? And if so, what would be the best way to attach these curved pieces? We strongly do not recommend trying to create curved deck tile trim and fascia. We would suggest adapting… Read answer
- Can I use a brad nail gun with NewTechWood composite material? We would recommend using composite screws rather than nails when installing NewTechWood composite material. Read answer
- What kind of screws do you recommend if installing the decking by screwing through the face of the board? We currently offer both color match screws and screws with plugs. You can view them on our website:… Read answer
