The UltraShield® Difference

Engineered to outlast the elements.

Every NewTechWood board pairs a dense polyethylene-and-wood-fiber core with a 360° polymer cap — tested against stains, scratches, fade, and boiling water. Composite that looks like wood and behaves like a fortress.

Since 2006

We set out to reinvent wood-plastic composite — and did.

NewTechWood® engineered a board that delivers unmatched durability, beauty, and long-term performance. After years of innovation and rigorous field-testing, UltraShield® emerged: a fully capped, all-weather system that fuses high-density polyethylene and wood fibers beneath a protective polymer shell. The result is a board that resists fading, scratching, and the elements — built to stay beautiful for decades.

Cross-section of an UltraShield capped composite board
Anatomy of the board

Two layers doing two jobs.

Co-Extruded Cap

An impenetrable outer layer that withstands staining, fading, scratching, cupping, swelling, mold, and mildew — fused to the core on all four sides during extrusion, so it can never peel or delaminate.

Composite Core

High-quality recycled materials with dense hardwood and softwood fibers give the board impressive strength, rigidity, and dimensional stability underfoot.

Not all capping is equal

Five ways to cap a board. One that stays sealed.

“Capped composite” covers a wide range of construction. What separates them is how much of the board the cap actually reaches.

  1. Uncapped

    No outer layer at all.

    First-generation composite leaves the core exposed on every face. It crumbles, fades, and scratches much like the wood it replaced.

  2. Capped with wood powder

    A cap that still contains wood.

    The outer layer is mixed with wood powder, so organic material sits at the surface where weather reaches it — and behaves accordingly.

  3. Capped on top only

    Protected where you look.

    Stains, scratches, and UV are handled on the walking surface. Moisture still enters from below, and the board cups and twists until the top layer cracks.

  4. Capped, grooves routed after

    Protected until it is cut.

    Top and bottom are sealed, then the fastener grooves are machined through the cap — reopening the core exactly where hardware and water meet it.

  5. Capped 360° NewTechWood

    Every face, grooves included.

    Top, bottom, sides, and grooves are all wrapped, so there is no untreated edge for moisture, UV, or pests to find. This is how every NewTechWood board is built.

What the cap defends against

One shell. A whole list of problems it ends.

Won’t fade

The cap locks in color against relentless UV, so boards hold their tone season after season.

Won’t stain

Spilled wine, grease, and sunscreen wipe clean off the sealed polymer surface.

Won’t scratch easily

A hardened outer shell shrugs off dragged furniture, paws, and patio traffic.

Won’t warp

A dense core stays dimensionally stable — no cupping, swelling, or splitting.

Won’t rot

Impervious to the moisture, insects, mold, and mildew that destroy real wood.

Tested to the extreme

Validated against staining, fade, scratching — even boiling water poured on the deck.

Tested, not asserted

What the lab found.

Every claim on this page traces back to a bench test. These are the standards used and the numbers they produced.

Scratch resistance

FLTM BO 162-01

1 mm needle drawn under 8–20 N of pressure

No obvious mark at 20 N

Conventional decking marks at 8 N

Abrasion resistance

ASTM D4060

750 g load, 1,000 turns at 60 rpm; material loss weighed

23 mg lost

Conventional composite lost 81 mg

UV & color fastness

QUV accelerated weathering

QUV accelerated weathering chamber, 3,000 hours, recorded every 500

ΔE 2.72–3.75 after 3,000 hours

ΔE 0.65–1.25 at the 500-hour mark

Boiling water

90-hour submersion

Submerged at 100 °C and observed every two hours

No separation of cap from core

No cracking, no visible damage

Stain resistance

Comparative panel test

Black ink applied, partially wiped, then washed with water

Surface returns clean

Conventional decking holds the stain

Results are from NewTechWood’s comparative laboratory testing of UltraShield® against conventional composite decking. ΔE is the standard measure of color change — lower is better, and a difference below about 3 is hard for the eye to detect.

Why it holds up

Protection you can stand on for 25 years.

360° UltraShield® cap

A co-extruded polymer shell wraps the board on every side — not just the top — for uninterrupted, all-weather protection.

25-year warranty

Decking, siding, fencing and railing carry a 25-year residential limited warranty. We can promise decades because the material is built to deliver them.

Made responsibly

Cores are built from high-density recycled polyethylene and reclaimed wood fiber — durable and sustainable.

Luxury terrace at dusk with composite-clad soffit
The Material

Looks like wood. Lives like something tougher.

See the grain, color, and texture in person before you commit — we’ll send the swatches to your door.

Order free samples

Feel the difference in your hands.

Order free samples, or find the nearest dealer carrying the full UltraShield® collection.