The Answer
No, as we have introduced a new locking T-clip, with only grips on one side, they can be used on staggered boards without locking both boards ( see an image here )
Keep Reading
More on Accessories & Hardware
- Do you need to pre-drill if using NewTechWood Starborn deck screws? Pre-drilling is required if not you will notice mushrooming. Read answer
- Do you offer any sort of plugs for your deck screws? Yes, we do offer out pro plug kit. You can view it on our website: https://www.newtechwood.com/product/deck-clips/ Read answer
- Can I use butyl deck tape on my joists in conjunction with NewTechWood? Yes, this would be fine. We also offer our own Joist Tape that is specified with out decking… Read answer
- Would it be possible to create outside and inside curves using the deck tile trim and fascia? And if so, what would be the best way to attach these curved pieces? We strongly do not recommend trying to create curved deck tile trim and fascia. We would suggest adapting… Read answer
- How many deck screws does each board take? We recommend you use two screws every 16 inches, this comes to 24 screws per board for a… Read answer
- What kind of drill bit is needed to use the deck screws? Do I need to counter sink or counter bore the screw? The drill bit is included in the screw pack. We do recommend for you to pre-drill. Read answer
