The Answer
Yes, you can. While we do not have a specific bolt size, we would recommend pre-drilling, at a size bigger than the bolt itself, as to allow for some board expansion and contraction.
Keep Reading
More on Accessories & Hardware
- Can I use metal flashing with my siding trim? Yes, you may.As long as the siding fits in the trim and allows for expansion and contraction. Read answer
- What is the best way to ensure one does not over tighten the screw when using the T-clip? To avoid this issue, make sure to set the appropriate torque setting on the drill or screw gun. Read answer
- Do you offer any sort of plugs for your deck screws? Yes, we do offer out pro plug kit. You can view it on our website: https://www.newtechwood.com/product/deck-clips/ Read answer
- Would NewTechWood deck tiles allow for trim or fascia to be connected if the deck tile is cut? Cutting the connectors does disallow for the deck tiles to be connected to the edge pieces. We have… Read answer
- Is all hardware included with the [deck boards / deck tiles / siding / garden products]? Hardware for the deck boards are sold separately from the boards. Trim for the deck tiles are sold… Read answer
- In the European style siding installation guide, screws are required. How do I hide these screws? You can use our color-match fascia screws for this. This will allow them to not be seen clearly… Read answer
