The Answer
Yes, this would be fine.
Keep Reading
More on Siding & Cladding
- What are the details of interior installation of NewTechWood siding? NewTechWood siding can be installed on interior surface, on plywood, without furring strips, if the room in which… Read answer
- For AW08 siding clips, do you provide screws? If not, what kind do you recommend? No, AW08 clip does not inlcude the screws. You can purchase them separately which would be AW08-SCREW-100. It… Read answer
- Can a Z-girt be used with NewTechWood tongue and groove siding, for example if the insulation is on the outside of the structure? Yes, the Z-girt may be used. Read answer
- Why does the install guide for the European style siding allow for 1.64 feet (500 mm) between joists? We do recommend 16 inches on center for horizontal installs and 12 inches on center for vertical installs. Read answer
- Do the NewTechWood siding starter strips have to be continuous? No, but we do not recommend gaps of greater than 12 inches for ceiling or wall application. We… Read answer
- My siding surface is covered in plywood. Do I still need to use furring strips? No, as long as you have 5/8in thick plywood, you can install directly onto the plywood using our… Read answer
