The Answer
We recommend using a Table Saw, Jig Saw or a Chop Saw with a Carbide Tipped Blade with 60 teeth.
Keep Reading
More on Deck Tiles
- How much weight do the deck tiles hold? You can estimate about 100 lbs per square foot to be supported by the deck tiles. However, this… Read answer
- Would it be possible to create outside and inside curves using the deck tile trim and fascia? And if so, what would be the best way to attach these curved pieces? We strongly do not recommend trying to create curved deck tile trim and fascia. We would suggest adapting… Read answer
- Can grass tiles and deck tiles be connected to each other? Yes, any NewTechWood US-QD line product including the deck tiles, grass tiles, and planter boxes, can be connect… Read answer
- What should be used for your NewTechWood deck tiles in terms of gravel and sand depth? Is sand needed on top of the gravel? We would recommend using two inches of gravel covered by one inch of sand. You would therefore want… Read answer
- Do NewTechWood deck tile plastic connectors get brittle in the cold? No, the plastic in these deck tiles are not affected by the cold and should not be damaged… Read answer
- Could I place a hot tub on these deck tiles? While this can hold a hot tub, if the hot tub has uneven weight distribution, it would be… Read answer
