The Answer
Since the screw of the T-clip is accessible via the gap, they can be loosened. Once they are sufficient loose, the damage board may be slid out, replaced, and the T-clips screwed back in.
Keep Reading
More on Maintenance & Care
- What is the best way to remove snow from NewTechWood decking and deck tiles? You are welcome to use use ice melt to remove snow. Please ensure the ice melt is washed… Read answer
- Do you have a specific sealer for cut ends? We recommend using a water-based sealer, such as Thompsons Water Seal, that are available at major building material… Read answer
- Can NewTechWood composite material be painted? Our composite material cannot be painted. Paint will not stick to the composite material, although certain plastic-specific paints… Read answer
- Could I power wash NewTechWood composite material? We do not recommend power washing our material as the force can cause filamentation of the outer covering.… Read answer
- Can a firepit be placed over the deck boards or deck tiles? It would be best to install around the firepit. As long as our material is not on direct… Read answer
- Would freeze-thaw cause issues with ice between the boards? No, the moisture would just evaporate through. Read answer
