The Answer
Yes, it does! NewTechWood siding received NOA approval. It can be reviewed here: https://www.newtechwood.com/pdf/NewTechWood_Miami_Dade_County_NOA.pdf.
Keep Reading
More on Siding & Cladding
- My siding surface is covered in plywood. Do I still need to use furring strips? No, as long as you have 5/8in thick plywood, you can install directly onto the plywood using our… Read answer
- For AW08 siding clips, do you provide screws? If not, what kind do you recommend? No, AW08 clip does not inlcude the screws. You can purchase them separately which would be AW08-SCREW-100. It… Read answer
- Can the NewTechWood siding boards be installed with the smooth side exposed? Is there a smooth surface version of the siding boards? The siding cannot be installed this way, as the shape of the board would make this impossible to… Read answer
- Can the outside corners be mitered instead of using siding fascia? We do not recommend mitering corners as our boards will expand and contract, we recommend using our outside… Read answer
- How much spacing do you need between the wall and the boards? With a ¾ inch spacing created by the joists and an additional ¼ created by the AW08 siding… Read answer
- In addition to the US44 end trim, how else may I close out the bottom of a vertical siding installation? You can use a PVC trim board across the bottom to keep all the boards straight. Read answer
