A message to our valued customers

We are extremely grateful for the support you've shown us in supporting our business during this Covid 19 pandemic. We have been overwhelmed with orders and requests for samples for our products. We hope you and your families are all are staying safe, as family is the most important thing. Our family of employees are very important to us, and we have taken measures to keep them safe as well. As such, you may experience delays in deliveries and the processing of some sample orders in the short term, as we all deal with these issues together. We very much appreciate your patience. Be well!

You can get them from our partner Staborn, specifically the Deckfast Metal screws (http://starbornindustries.com/deckfast-metal-product). They are available to color match. You can use the guide here to figure out which color matches our material: http://starbornindustries.com/deck-matcher/tool.
The moistureshield would go under the subframe itself. The boards have to be attached to the subframe, and would therefore pierce any material between the two.
A subframe under our boards would not need to be bolstered to the ground (such as with a floating deck), if the installation is significantly heavy, and not likely to be moved, or unbalanced.
Yes, to do so, either screw through the face to attach them, use the mini-gap clips, or use The Tiger Claw TC-G clip. The boards would still need to be properly supported.
Yes, this is possible but would require the boards to be structurally supported, at 16 inches on center, or less.